EDFA OPTICAL AMPLIFIER REA-20
- The “REA-20” is a High sensitivity & High performance EDFA (Erbium Doped Fiber Amplifier), designed for CATV long-distance transmission and large HFC & FTTH distribution networks. A built-in 2, 4 or 8 way optical splitter can be supplied (opt.).
- Several GAIN Control Modes can be selected:
- APC Automatic Power Control (for CATV)
- AGC Automatic Gain Control
- ACC Automatic Current Control
- Input and Output Optical Power are continuously sampled and monitored with feedback and alarms, through the SNMP and WEB browser interface and front panel display.
- There are several ways to set and verify Functions, Alarms and Data Logger:
- With WEB Browser through the LAN port.
- With SNMP through the LAN port.
- With Keys and LCD display, IP address Set & Alarm reading only.
- High stability and high gain up to 30 dB
- High output power up to 20 dBm
- Front panel security Key Lock for Laser
- Low noise 5 dB typ. at 0 dBm power input
- 1530 to 1565 nm high reliability Amplifier
- 980 nm high stability Laser Pump diode
- Selectable GAIN mode APC or AGC and ACC
- LCD Display and keys on the front panel
- Triple color LED for status indication and alarms
- Optical Input and Output power monitoring alarm
- Complete temperature, power, current, SBS, reflections monitoring alarms & Data Logger
- Front panel Led alarm when Laser Lock is switch OFF
- Built-in 2, 4 or 8 way optical splitter (optional)
- SC/APC shuttered optical connector
- USB A & B port for easy SW up-grades
- LAN port for settings and full SNMP management
- LAN port for settings and Web Browser operation
- Wired Remote Control via insulated contact (opt. Board)
- Redundancy Power Supply Unit, 1AC + 1DC or 2 AC (opt.)
- Very thin design, only 1 Unit 19” Rack